Removing the optical drive (3.5-inch)
1.
Follow the procedure in
2.
Remove the:
•
cover
•
bezel
3.
To remove the optical drive:
a. Disconnect the data cable and power cable from the connectors on the optical drive [1, 2].
b. Press the blue release tab [3] and slide the optical drive out of the optical drive bay [4].
Installing the optical drive (3.5-inch)
1.
Insert the optical drive into the optical drive bay until it clicks into place.
2.
Connect the data cable and power cable to the connectors on the optical drive.
3.
Install the:
•
bezel
•
cover
4.
Follow the procedure in
Removing the SD card reader
1.
Follow the procedure in
2.
Remove the:
•
cover
•
bezel
3.
Open the
front bezel
4.
To remove the SD card reader:
Before Working Inside Your
After Working Inside Your
Before Working Inside Your
door.
Computer.
Computer.
Computer.
13