Remove/Replace Control Board - Silver King SK-1-C1 Service Manual

Cream Dispenser
Model SK-1-C1
Remove Control Board
Unplug the unit. Remove cream bin from unit.
1
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Remove the drip tray from the unit
2
Loosen the (4) screws to remove front cover and ac-
3
cess the electronics. Reference the
Press on tab and pull straight to remove the display
4
cable. Set front fascia aside. Reference the
Yellow Arrow
Remove all (6) connectors from the Control Board.
6
Note the position of each connector.
Remove (2) M5 nuts to remove the board assembly.
7
Reference the Green
Replace Control Board
Reinstall (2) M5 nuts to secure Board assembly to unit.
1
Previously removed in step 7.
Reconnect all (6) connections to board. Previously re-
2
moved in step 6
Reinstall the display cable. Previously removed in
3
step 4.
WARNING
Red Arrows.
Arrows.
Reinstall the front fascia onto unit. Ensure (4) screws
4
are secure. Previously removed in step 3
Reinstall drip tray and creamer bin. Plug in unit. Verify
5
functionality of unit.
# 3
# 3
# 4
# 7
9
References
# 7
# 3
# 3