Remove/Replace Power Supply - Silver King SK-1-C1 Service Manual

Cream Dispenser
Model SK-1-C1
Remove Power Supply Assembly
Unplug the unit. Remove cream bin from unit.
1
Failure to disconnect power
from the unit before servicing
Remove the drip tray from the unit
2
Loosen the (4) screws to remove front cover and ac-
3
cess the electronics. Reference the
Press on tab and pull straight to remove the display
4
cable. Reference the
Set front fascia aside.
5
Remove (2) cables from power supply, and (4) cables
6
from each relay. Refer to the
Remove the power supply assembly by removing (2)
7
M5 nuts. Refer to the
Replace Power Supply
Install the new power supply assembly by securing (2)
1
M5 nuts. Previously removed in step 7.
Reconnect (2) connections to power supply, and (4)
2
connectors to each relay. Previously removed in step 6
Reinstall the display cable. Previously removed in
3
step 4.
WARNING
Red Arrows.
Yellow Arrow
Blue Arrows.
Green Arrows.
Reinstall the front fascia onto unit. Ensure (4) screws
4
are secure. Previously removed in step 3
Reinstall drip tray and creamer bin. Plug in unit. Veri-
5
fy functionality of unit.
# 3
# 3
# 4
#
7
13
References
# 3
# 3
# 6
# 6
#
# 6
7