Acura TLX 2017 Manual page 328

■
Starting to Drive
When the engine was started using the two-way keyless access remote
1. While depressing the brake pedal, press the ENGINE START/STOP button.
When the engine was started in any case
2. Change the gear position to
3. With the parking brake applied, release the brake pedal and gently depress the
accelerator pedal.
Make sure the electric parking brake indicator goes off.
u
4. Gradually release the brake pedal and gently depress the accelerator pedal to pull
away.
* Not available on all models
D . Select R when reversing.
( (
1Starting to Drive
You can also release the parking brake by pressing
*
the electric parking brake switch while depressing the
brake pedal.
When facing downhill, you can start your vehicle
more smoothly by manually releasing it with the
electric parking brake switch than by releasing it with
the accelerator pedal.
When the engine was started using the two-way
keyless access remote
The engine stops when the gear position is changed
from ( P
pressed. Follow the step 1 when starting to drive.
Continued
uuWhen DrivinguStarting the Engine
*
before the ENGINE START/STOP button is
327