Media Installation; Log Set And Topaz Glass Installation; Acrylic Crystal Media Installation - Napoleon NEFBD60HE Installation And Operation Manual

fi nishing
EN
4.3

media installation

There are 2 media options for this appliance: log set and acrylic crystals. The log set comes pre-installed with the
appliance and has to be fi nished with topaz glass (see "log set and topaz glass installation" section). If desired, the
log set and topaz glass can be switched out with acrylic crystals (see "acrylic crystal media installation" section).

4.3.1 log set and topaz glass installation

The log set comes pre-installed with the appliance and
has to be fi nished with topaz glass. Carefully place the
topaz glass between the log set (front and back sides)
after framing the appliance and before installing the
front glass.
note:
Do NOT cover triangular covers on the back side
of the appliance (Fig. 4-5). Blocking the triangular
covers with media will alter the fl ame appearance.

4.3.2 acrylic crystal media installation

note:
Ensure to vacuum up any topaz glass or acrylic crystals outside the media tray area before operation.
Do NOT cover triangular covers on the back side of the appliance. Blocking the triangular covers with media will
alter the fl ame appearance.
A.
Remove the topaz glass.
B.
Remove the screws from the log set base/media tray. Keep the screw with the log set for future use (Fig.
4-6).
C.
Remove the log set (Fig. 4-7).
D.
Install the media tray, ensuring to NOT re-install the screws as they can cause the media tray to bow
when heated (Fig. 4-8).
E.
Carefully place the acrylic crystals into the media tray, creating an even layer from side to side.
F.
Reverse these steps to re-install the log set with topaz glass.
Fig. 4-6
20
W415-2107 / D / 04.15.20
Fig. 4-7
Fig. 4-5
Triangular
Cover
Fig. 4-8