How To Start The Engine - Lexus SC 430 2004 Manual

STARTING AND DRIVING

HOW TO START THE ENGINE

Before cranking
1. Apply the parking brake firmly.
2. Turn off unnecessary lights and accessories.
3. Put the selector lever in "P". If you need to restart the engine
while the vehicle is moving, put the selector lever in "N". A
starter safety device will prevent the starter from operating if
the selector lever is in any drive position.
4. Depress the brake pedal and hold it to the floor until driving
off.
Starting the engine
Before starting the engine, be sure to follow the instructions in
"Before cranking".
Normal starting procedure
The multiport fuel injection system/sequential multiport fuel
injection system in your engine automatically controls the
proper air-fuel mixture for starting. You can start a cold or hot
engine as follows:
200
With your foot off the accelerator pedal, crank the engine by
turning the ignition switch to "START". Release it when the
engine starts.
Engine should be warmed up by driving, not in idle. For
warming up drive with smoothly turning engine until engine
coolant temperature is within normal range.
If the engine stalls ...
Simply restart it , using the correct procedure given in normal
starting.
If the engine will not start
See "If your vehicle will not start" on page 240.
NOTICE
D Do not crank for more than 30 seconds at a time. This
may overheat the starter and wiring systems.
D Do not race a cold engine.
D If the engine becomes difficult to start or stalls
frequently, have the engine checked immediately.