Minolta HN-DPF1001 Instruction Manual page 2

erating or adjusting this product, please read this user's manual
carefully and completely.
1. POWER
Use power adapter to power on the
press and hold power button for approximately 3 seconds to
access reboot or power off menu. Short press on power
button will turn off/on screen (but leave the photo frame in
on position).
2. Micro USB
Connect a USB flash drive via an on the go adapter for USB-A
to Micro USB (not included). It is not for connecting to computer.
3. REBOOT
Short press with paper clip to reboot unit. Pressing the reboot
button for more than 2 sec will cause the unit will go into factory
set up mode, which is for factory use only. If you accidently go into
the factory mode then short pressing the Power Button will restart
the unit again.
4. MICRO-SD
Load external max 32GB microSD memory card here.
5. DC
Connect DC adapter to power on the device.
2
1
3
TF
4 2 5
frame. When it is on,