Table of Contents
Advertisement
clips, press the SHOT (RIGHT) key to start playing, press again to stop.
• Press the UP key for the previous photo or video and the DOWN key for
the next one. When viewing images, the total number of all images in the SD
card and the index of the displaying image are shown in the center of LCD
and at the bottom of the video monitor respectively.
• Press the OK key to return to live preview state (SETUP mode) when
playback is finished.
Reviewing Images by Connecting the Camera to a Computer
You can always unmount the entire camera from the tree and connect its USB
port to a computer-it will be recognized as a "removable disk", without the need
to install any drivers or software. When using a PC (or Mac*) to view photos (or
video clips*), first connect the device to the computer with a USB cable (not
included, available at most electronics/computer retailers) that has a "Mini-B"
USB plug on one end (camera) and a "Standard-A" USB plug at the other end
(computer). Then use commercial software with an image browser feature, or an
image browser included with the PC's operating system to view images saved
on the SD card in the folder \DCIM\100EK113. Each new image or video will
be numbered incrementally in order of the time it was captured (first four digits
indicate month/day). For example, you will see file names such as "09030001.
JPG" or "09030001.avi". Through the file format suffix you can distinguish
whether the file is a still photo (with suffix .jpg) or a video (with suffix .avi).
*".avi" video files may require additional software for viewing on a Mac.
The Trophy Cam HD supports 3 kinds of file system formats, FAT12, FAT16,
and FAT32. The default value is FAT16 to save photos and videos. Here are some
related notes:
• You don't need to be concerned about the file system format of the Trophy
Cam HD unless your equipment has problems reading the SD card. If this
happens, please format the SD card with the Trophy Cam HD or in your
computer first and then insert the card into your Trophy Cam HD and try
again.
• The default file system format of the Trophy Cam HD is FAT16, which most
computers can read. If you format an SD card for the Trophy Cam HD in
your computer, you should choose the file system format FAT16. Normally
FAT16 is recommended unless you have another image viewer that uses
FAT12 or FAT32 format.
24
Advertisement
Table of Contents
