Bushnell TROPHY CAM HD ESSENTIAL 119736C Instruction Manual page 12

is left in the SETUP position (unless you press the RIGHT/Shot key after exiting the
menu)-in fact, the camera will power off automatically after a few minutes with no
key pressed.
Parameter Display
The settings for a parameter are shown on the display as follows:
Only one setting is displayed at a time, starting with the current setting for
the parameter when it is first selected (Fig. 4a). To change the setting, use
the UP/DOWN keys to display the new setting you want (Fig. 4b), then
press OK to "Execute" (make the actual change to this setting). If you want
to confirm this setting is now the current one, just press the RIGHT key
to scroll to the next parameter, then press LEFT to go back again to the
previous one. You should see the parameter setting you just made.
Fig. 4: Selecting Parameter Settings
Press MENU
12
(4a)
Press DOWN to select new setting
for the highlighted parameter
(4b)
Press OK to confirm and execute
the new setting