Using Automated Settings; Clearing All Settings; Using Auto Unlock - Quantum DLT S4 Quick Start Manual

StorageCare Sage Dashboard and StorageCare

Using Automated Settings

Clearing All Settings

Using Auto Unlock

8
The
Automated Security Settings of This Drive
the Auto Unlock and Auto Add Key features are on or off, and allows you to clear all
settings and enable Auto Unlock and Auto Add Key. See
dialog box.
Security Settings
0 This feature turns the Auto Unlock and Auto Add Key features OFF and removes the
Secure Key from the tape drive.
Now, when you insert any cartridge that has a Secure Key, the cartridge will be locked
and you will have to unlock it.
To clear all settings:
1 Unload the tape cartridge.
2 Click the button.
Refresh
3 Click .
Settings
4 Select the
Clear all settings
5 Click .
OK
Note: Clear All Settings will also occur if you turn off the tape drive, or if the drive
loses power.
This feature saves you time by automatically unlocking cartridges with a specified Secure
0
Key. The drive compares the Secure Key of a newly inserted cartridge to the Secure Key
on the drive. If the Secure Key on the cartridge matches the Secure Key on the drive, the
cartridge automatically unlocks and you can read from and write to the media. If the
Secure Keys do not match, you must manually unlock the cartridge.
Note: When you add a Secure Key, unlock a cartridge using a Secure Key, or change
a Secure Key, the Auto Unlock feature resets to ON and the newly entered
Secure Key becomes the key saved to the drive and used to compare inserted
cartridges against. This could cause problems if you are not careful (see
Avoiding Problems With Automated
To turn Auto Unlock ON:
6 Unload the tape cartridge.
7 Click the button.
Refresh
8 Click .
Settings
9 Select the
Automatically Unlock cartridges that match this key
figure 6).
10 Enter the Secure Key in the
Using Automated Settings
section of the Tape Security tab shows you if
radio button (see figure 6).
Settings).
field.
Key
figure 6 for the
Automated
radio button (see