Table of Contents
Advertisement
Seats
86
clean the seat covers as recommended;
R
see the "Interior care" section.
do not transport heavy loads on the
R
seats. Do not place sharp objects on the
seat cushions, e.g. knives, nails or tools.
The seats should only be occupied by
passengers, if possible.
when the seat heating is in operation, do
R
not cover the seats with insulating
materials, e.g. blankets, coats, bags,
seat covers, child seats or booster seats.
! When you move the seats, make sure that
there are no objects in the footwell or
behind the seats. Otherwise, you could
damage the seats and the objects.
Adjusting the seats
Backrest angle
:
Seat fore-and-aft adjustment
;
Seat cushion angle
=
Seat height
?
i
You can store the seat settings using the
memory function (
Adjusting the lumbar support
You can adjust the contour of the seat so as
to provide optimum support for your back.
page 91).
Y
To adjust the upper back support
:
To adjust the contour of the backrest in
;
the lumbar region
To adjust the lateral structure and support
=
of the seat
Select key position 2 with the Start/Stop
X
button.
i
If, after a certain amount of time, the seat
no longer has the desired contour, repeat
the adjustment.
Switching the seat heating on/off
Switching on/off
G
WARNING
Repeatedly setting the seat heating to level
3 may result in excessive seat temperatures.
The health of passengers that have limited
temperature sensitivity or a limited ability to
react to excessively high temperatures may
be affected or they may even suffer burn-like
injuries. Therefore, do not use seat heating
level 3 repeatedly.
The three red indicator lamps in the button
indicate the heating level you have selected.
i
If the battery voltage is too low, the seat
heating may switch off.
Advertisement
Chapters
Table of Contents
