Table of Contents
Advertisement
AMG SPEEDSHIFT DCT 7-speed sports transmission
120
The transmission could be damaged.
i
The E-SELECT lever always returns to its
original position.
The current transmission position P, R, N
or D appears in the transmission position
display in the multifunction display.
If you wish to select a transmission position
or to disengage park position P, the engine
must be running.
Engaging park position P
When the vehicle is stationary, depress the
X
brake pedal.
Press the P button in the center console.
X
i
If you depress the brake pedal and push
the E-SELECT lever forwards or back to the
first point of resistance, park position P is
disengaged. The transmission shifts to
neutral N.
To shift directly from P to R:
Depress the brake pedal and push the
X
E-SELECT lever forwards past the first
point of resistance.
To shift directly from P to D:
Depress the brake pedal and push the
X
E-SELECT lever back past the first
point of resistance.
Engaging park position P automatically
Park position is engaged automatically in the
following circumstances:
if you switch off the engine using the Start/
R
Stop button and open the driver's or front-
passenger door.
if you remove the SmartKey from the
R
ignition lock.
if you open the door while traveling at low
R
speed in transmission position D or R.
Shifting to neutral N
When the vehicle is stationary, depress the
X
brake pedal.
Push the E-SELECT lever forwards or back
X
to the first point of resistance.
i
If you use the E-SELECT lever to shift the
transmission to N before switching off the
engine, the transmission remains in N for
approximately 30 minutes. If you open the
driver's or front-passenger door during this
period, the transmission automatically
shifts to P.
If the SmartKey is in the ignition lock and
you use the E-SELECT lever to shift the
transmission to N before switching off the
engine, the transmission remains in N. This
still applies if you open the driver's or front-
passenger door. Further information is
available in the "Car wash" section
(
page 223).
Y
Engaging reverse gear R
When the vehicle is stationary, depress the
X
brake pedal.
Push the E-SELECT lever forward past the
X
first point of resistance.
Shifting to transmission position D
When the vehicle is stationary, depress the
X
brake pedal.
Push the E-SELECT lever back past the first
X
point of resistance.
Advertisement
Chapters
Table of Contents
