Wharfedale Pro TYPHON-AX8 User Manual page 10

1. VOLUME controls for INPUT A and INPUT B:
These knobs control the level of each input channel.
2. DSP setting : (4 modes)
1) FLAT
2) MONITOR
3) BASS
4) PUNCH
3. DSP Selection
With each tap of the D-EQ button, the DSP will step through each of the 4 above
DSP modes. The LED will show which DSP mode is currently active.
4. Bluetooth operation (Typhon - BT models only) :
a. MONO Mode:
Press and release the PAIR button on one speaker only.
Select "Wharfedale Pro BT" on your device. The BT LED will change to solid when
paired.
To disconnect, press and release the PAIR button.
b. STEREO Link Mode: - For use with 2 units of Typhon -BT loudspeakers.
Press and hold the PAIR button on each speaker until the ST LED is blinking. The
ST LED will change to solid when Linked.
Press and release the PAIR button on one speaker. Then select "Wharfedale PRO
BT" on your device. The BT LED will change to solid when paired. The selected
speaker will be the left channel.
To disconnect, press and hold the PAIR button for 5 Seconds.
Transmission distance note : A single speaker working range is about 15 meters
(Bluetooth device (eg Phone) to single speaker). When using a Bluetooth Typhon
in stereo link mode the working range is about 10m (Bluetooth device (eg Phone)
to speaker). In this mode the linked speakers can be up to 8m apart.
15m
Typhon BT model
Phone
Bluetooth device
Typhon BT model
8
Phone
Bluetooth device
10m 10m
8m
Typhon BT model