Related Manuals for Milwaukee M12 FUEL CID
Summary of Contents for Milwaukee M12 FUEL CID
- Page 1 For technical review, sent 007 Feb 2014 opErator's MaNUaL Cat. No. M12 CID M12 CIW M12™ FUEL™ 1/4" Hex Impact Driver, 3/8" & 1/2" IMpaCt wrENCH To reduce The risk of injury, user musT read and undersTand operaTor's manual.
- Page 2 For technical review, sent 007 Feb 2014...
-
Page 3: Work Area Safety
For technical review, sent 007 Feb 2014 general poWer Tool safeTy Warnings Warning read all safeTy Warnings and all insTrucTions. Failure to follow the warnings and instructions may result in electric shock, fire and/or save all warnings and instructions for future reference. serious injury. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. attached to a rotating part of the power tool may Work area safeTy result in personal injury. -
Page 4: Specific Safety Rules
• M aintain labels and nameplates. These carry funcTional descripTion important information. If unreadable or missing, contact a MILWAUKEE service facility for replacement. • warNINg: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. -
Page 5: Operation Warning
For technical review, sent 007 Feb 2014 assembly operaTion Warning Warning Recharge only with the Always remove battery charger specified for the battery. pack before changing or removing For specific charging instructions, read the accessories. Only use accessories specifi- operator’s manual supplied with your charger cally recommended for this tool. Others may and battery. -
Page 6: Maintenance
Be particularly careful when impacting smaller properly, return the tool, charger and battery pack, fasteners because they require less impacting to to a MILWAUKEE service facility for repairs. reach optimum torque. Practice with various fasteners, noting the length Warning To reduce the risk of per- of time required to reach the desired torque. - Page 7 Techtronic Industries (Australia) Pty. Ltd. Doncaster, Victoria, Australia, 3108 Milwaukee Electric Tool Corporation (New Zealand) Techtronic Industries (New Zealand) Pty. Ltd. Mangere, Auckland, New Zealand, 2022 Professionally made in China for Milwaukee Electric Tool Corporation 58-14-2454d1 Printed in China 961075188-01(A)