Accessories - Gardena FlexControl 1883 Operation Instructions Manual

Water computer
Hide thumbs Also See for FlexControl 1883:
Table of Contents

Advertisement

Problem
Watering program is not being
undertaken (no watering)
Water Computer does not close
NOTE: For any other malfunctions please contact the GARDENA service department. Repairs must
only be done by GARDENA service departments or specialist dealers approved by GARDENA.

8. ACCESSORIES

GARDENA Soil Moisture Sensor
GARDENA Rain Sensor electronic
GARDENA Anti-theft device
GARDENA Adapter cable
26
Possible Cause
Program entry / modification during or
just before the start pulse.
Tap turned off.
Soil moisture or rain sensor registers
damp.
Controller is not connected.
Battery flat (
is continuously
displayed).
Minimum quantity of water drawn
is less than 20 l/h.
To connect older GARDENA sensors
Remedy
v Make program entry / modification
outside the programmed start times.
v Turn tap on.
v If dry, check setting / location of soil
moisture / rain sensor.
v Mount controller on housing.
v Insert new (alkaline) battery.
v Connect more drip heads.
Art. 1188
Art. 1189
Art. 1815-00.791.00
from GARDENA Service
Art. 1189-00.600.45
from GARDENA Service

Advertisement

Table of Contents
loading

Table of Contents