Download Print this page

Safe Fleet REAR VIEW SAFETY RVS-111 Instruction Manual

Front and rear sensor system

Advertisement

Quick Links

Instruction Manual
Front and Rear Sensor System
RVS-111
Rear View Safety, Inc. © 2017

Advertisement

loading

Summary of Contents for Safe Fleet REAR VIEW SAFETY RVS-111

  • Page 1 Instruction Manual Front and Rear Sensor System RVS-111 Rear View Safety, Inc. © 2017...
  • Page 2 4 rear sensors Introduction......03 Information......04 Safety Before Beginning Installation .
  • Page 3 4 front sensors Many thanks for selecting and using our high quality parking sensor. This prod- uct is only as a auxiliary warning device, not directly involved in the reversing control. Before installation and use the system, please read this manual care- fully.
  • Page 4 If you have questions about this product, contact: Rear View Safety 1797 Atlantic Avenue Brooklyn, NY 11233 Tel: 1.800.764.1028 IN NO EVENT SHALL SELLER OR MANUFACTURER BE LIABLE FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.
  • Page 5 Before drilling please check that no cable or wiring is on the other side of the wall. Please clamp all wires securely to reduce the possibility of them being damaged while vehicle is in use. Keep all cables away from hot or moving parts and electrical noisy components. We recommend doing a benchmark test before installation to insure that all components are working properly.
  • Page 6 System Descriptions • Car Front & Rear 8 Parking Sensor System, fit for all passenger cars • Sensor detection range: 0cm~2.5m • Display range: 40cm~2.5m • Improved anti-interference function • All weather design, plastic housing • 8 x MF1 analog sensor, 21mm plastic flat, 2.5m cable •...
  • Page 7 3. LED/LCD 8 sensors parking sensor lcd display NOTE: 6 Sensors no need to install F, G. When reversing the rear 4 sensors work. When braking the front 4 sensors work. the front 4 sensors measured 1 meters far away . Reverse With Confidence ™...
  • Page 8 Placement 1. The host and monitor installation onto general stick in the cab in the up- per left corner, convenient for drivers to see. The host usually stick on both sides of the car back box. Avoid placing hot, humid, water Leakage place. 2 Sensor installation height horizontal interval prior high he surface must be flat.
  • Page 9 NOTES Reverse With Confidence ™...
  • Page 10: One Year Warranty

    ONE YEAR WARRANTY REAR VIEW SAFETY, INC. WARRANTS THIS PRODUCT AGAINST MATERIAL DEFECTS FOR A PERIOD OF ONE YEAR FROM DATE OF PURCHASE. WE RESERVE THE RIGHT TO REPAIR OR REPLACE ANY SUCH DEFECTIVE UNIT AT OUR SOLE DISCRETION. REAR VIEW SAFETY, INC. IS NOT RESPONSIBLE FOR A DEFECT IN THE SYSTEM AS A RESULT OF MISUSE, IMPROPER INSTALLATION, DAMAGE OR MISHANDLING OF THE ELECTRONIC COMPONENTS.
  • Page 11 DISCLAIMER REAR VIEW SAFETY AND/OR ITS AFFILIATES DOES NOT GUARANTEE OR PROMISE THAT THE USER OF OUR SYSTEMS WILL NOT BE IN/PART OF AN ACCIDENT OR OTHERWISE NOT COLLIDE WITH AN OBJECT AND/OR PERSON. OUR SYSTEMS ARE NOT A SUBSTITUTE FOR CAREFUL AND CAUTIOUS DRIVING OR FOR THE CONSISTENT ADHERENCE TO ALL APPLICABLE TRAFFIC LAWS AND MOTOR VEHICLE SAFETY REGULATIONS.
  • Page 12 If you have any questions about this product, contact: Rear View Safety, Inc. 1797 Atlantic Avenue Brooklyn, NY 11233 800.764.1028 Better Cameras. Better Service. IT’S OUR GUARANTEE.