Yamaha MT03M Owner's Manual page 61

Periodic maintenance and adjustment
1
1. Projection
4. Lift up the rubber covers, and then
remove the air filter case cover by
removing the screws.
3
2
1. Air filter case cover
2. Screw
3. Rubber cover
5. Pull the air filter element out.
1
1. Air filter element
6. Insert a new air filter element into
the air filter case. NOTICE: Make
sure that the air filter element is
properly seated in the air filter
2
1
7-14
case. The engine should never
be operated without the air filter
element installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively
[ECA10482]
7. Install the air filter case cover by
installing the screws, and then
place the rubber covers in their
original positions.
8. Place the left side panel in the
original position, and then install
the bolts.
9. Install the rider seat.
To clean the air filter check hose
1. Check the hose on the front of the
air filter case for accumulated dirt
or water.
1. Air filter check hose
2. If dirt or water is visible, remove
the hose, clean it, and then install
it.
worn.
7
1