Yamaha MT03M Owner's Manual page 21

"F" (full) towards "E" (empty) as the fuel
level decreases. When approximately
3.0 L (0.79 US gal, 0.66 Imp.gal) of fuel
remains, the last segment starts flash-
ing. Refuel as soon as possible.
TIP
If a problem is detected in the electrical
circuit, the fuel level segments will flash
repeatedly. If this occurs, have a
Yamaha dealer check the vehicle.
Clock
1
1. Clock
The clock uses a 12-hour time system.
To set the clock
1. Push both the "SELECT" button
and "RESET" button until the hour
digits start flashing.
2. Use the "RESET" button to set the
hours.
3. Push the "SELECT" button and
the minute digits start flashing.
4. Use the "RESET" button to set the
minutes.
5. Push the "SELECT" button to con-
firm the settings.
Instrument and control functions
Coolant temperature meter
1. Coolant temperature meter
EAU87290
This meter shows the temperature of
the coolant, and thereby the condition
of the engine. The segments come on
from "C" (cold) to "H" (hot) as the en-
gine temperature increases. If the hot
MPH
segment flashes, stop the engine as
soon as possible, and let the engine
MPG mile cool. (See page 7-37.)
Transmission gear display
1. Neutral indicator light "
2. Transmission gear display
This display shows the selected gear.
The neutral position is indicated by
"
4-5
1
1 2
" and by the neutral indicator light.
EAU87350
MPH
MPG mile
EAU87400
MPH
MPG mile
"
4