Yamaha MT03M Owner's Manual page 24

Instrument and control functions
Average fuel consumption display
1. Average fuel consumption display
4
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either "AVE_ _._ km/L" or
"AVE_ _._ L/100 km", or "AVE_ _._
MPG" when using miles. To switch the
fuel consumption measurement units,
push the "SELECT" button until the
measurement units change.
"AVE_ _._ km/L": the average dis-
tance that can be traveled on 1.0 L
of fuel.
"AVE_ _._ L/100 km": the average
amount of fuel necessary to travel
100 km.
"AVE_ _._ MPG": the average dis-
tance that can be traveled on 1.0
Imp.gal of fuel.
TIP
To reset the display, push the
"RESET" button until it resets.
After resetting, "_ _._" is shown
until the vehicle has traveled some
distance.
EAU87860
MPH
1
Shift indicator light control mode
1. Shift indicator light "
2. Brightness level display
This mode cycles through 4 control
functions in the order listed below.
Shift indicator light on / flash / off
Shift indicator light on r/min
Shift indicator light off r/min
Shift indicator light brightness
To set the shift indicator light on / flash
/ off
1. Turn the vehicle off.
2. Push and hold the "SELECT" but-
ton.
3. Turn the vehicle on, and then re-
lease the "SELECT" button after 5
seconds.
4. Push the "RESET" button to select
one of the following flashing pat-
tern settings:
On setting: the shift indicator
light will come on when the
set engine speed is reached.
This setting is selected when
the shift indicator light stays
on.
Flash setting: the shift indica-
tor light will flash when the set
engine speed is reached. This
4-8
EAU87960
1
MPH
2
"