Clean The Mold; Wash The Mold - oticon Nera2 Pro Ti Instructions For Use Manual

Clean the mold

The mold should be cleaned
regularly. Use a soft cloth to
clean the surface of the mold.
Use the MultiTool wire loop
to clean the opening.
26 About Start up Handling Options Tinnitus Warnings More Info
Replace the tube
The tubing between the mold
and the instrument should be
replaced when it becomes
yellow or stiff. Consult your
Hearing Care Professional in
relation to this.

Wash the mold

Step 1 Step 2
Make sure you are Disconnect the
able to identify which tube and mold from
mold is for which the hook. Hold the
instrument before hook firmly when
disconnecting them pulling off the tube.
from the instruments. Otherwise the
instrument may
be damaged.
Step 3
Wash the mold
and tube using mild
soap. Rinse and dry
completely before
reconnecting to the
hearing instrument.
27