Clean The Mold; Wash The Mold - oticon Alta2 Pro Ti Instructions For Use Manual

Clean the mold

The mold should be cleaned
regularly. Use a soft cloth to
clean the surface of the mold.
Use the MultiTool wire loop
to clean the opening.
22 About Start up Handling Options Warnings Tinnitus Additionals
Replace the tube
The tubing between the mold
and the instrument should be
replaced when it becomes
yellow or stiff. Consult your
Hearing Care Professional in
relation to this.

Wash the mold

Step 1 Step 2
Make sure you are Disconnect the tube
able to identify which and mold from the
mold is for which hook. Hold the hook
instrument before firmly, when pulling
disconnecting them off the tube. Other-
from the instruments. wise the instrument
may be damaged.
Step 3
Wash the mold
and tube using mild
soap. Rinse and dry
completely before
reconnecting to the
hearing instrument.
23