Next steps
1. Follow the procedure in
Removing the M.2 2280 solid-state drive
For systems with solid-state drive in the hard drive bay will not support hard drive.
Prerequisites
1. Follow the procedure in
About this task
The figure indicates the location of the M.2 2280 solid-state drive and provides a visual representation of the removal
procedure.
Steps
1. Remove the (M2x3) screw that secures the solid-state drive cover to the chassis.
2. Turn the solid-state drive cover and remove it from the chassis to access the M.2 2280 solid-state drive.
3. Remove the (M2x3.5) screw to that secures the M.2 2280 solid-state drive to the chassis.
22
Removing and installing components
after working on your
device.
before working inside your
device.