Installing The Blades - Hunter Lakemont Installation Manual

Note:
Fan style may vary.
IMPORTANT
NOTE: Follow the instructions on the blade. Installing
it incorrectly could result in your fan not functioning.
Remove instructional label after installation.
Ceiling Bracket Downrod

Installing the Blades:

Hanging Fan Wiring
bag
Blade Screw
Canopy Blades
Slide the blades into position. Ensure
that the blades do not overlap one
another. Align the holes in the blade
arms with the holes on the fan.
Repeat x3
Put the blade washers found in the
hardware bag onto the blade
screws found in the
bag. Then install the blade screws
to secure each blade to the fan.
Repeat x3
x9 Blade Washer
bag
Light Remote
1886
hardware
x9
8
Troubleshooting