Table of Contents
Advertisement
1886
Note:
Fan style may vary.
Secure each blade to a blade iron as shown using the blade assembly screws, found
in the
hardware bag.
Repeat x3
Lightly attach the blade arms to the motor with
washers found in the
screws found in the
securely tighten after both screws are attached.
Repeat x3
7
Ceiling Bracket
Downrod
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
hardware bag and
hardware bag, then
Hanging Fan
Wiring
Insert the two canopy screws
found in the
hardware bag.
Canopy
Blades
x2
Canopy Screw
bag
NOTICE
If screw holes do not align
properly then rotate the canopy
180 degrees. Hanger ball shape
must match canopy opening for
correct canopy installation.
x9
Blade Screw
bag
x6
Blade Arm Screw
bag
x6
Washer
bag
Light
Remote
Troubleshooting
Advertisement
Table of Contents
