Qr Codes For The Rescue Card - Mercedes-Benz C-Class Cabriolet 2018 Operator's Manual

Hide thumbs Also See for C-Class Cabriolet 2018:
Table of Contents

Advertisement

Data stored in the vehicle
32
The following text is reproduced as required of
all manufacturers under Title 49, Code of U.S.
Federal Regulations, Part 575 pursuant to the
National Traffic and Motor Vehicle Safety Act of
1966.
If you believe that your vehicle has a defect
which could cause a crash or could cause injury
or death, you should immediately inform the
National Highway Traffic Safety Administration
(NHTSA) in addition to notifying Mercedes-Benz
USA, LLC.
If NHTSA receives similar complaints, it may
open an investigation, and if it finds that a safety
defect exists in a group of vehicles, it may order
a recall and remedy campaign. However, NHTSA
cannot become involved in individual problems
between you, your dealer, or Mercedes-Benz
USA, LLC.
To contact NHTSA, you may call the Vehicle
Safety Hotline toll-free at 1-888-327-4236
(TTY: 1-800-424-9153); go to http://
www.safercar.gov; or write to: Administrator,
NHTSA, 400 Seventh Street, SW., Washington,
DC 20590.
You can also obtain other information about
motor vehicle safety from
http://www.safercar.gov
Limited Warranty
!
Follow the instructions in this manual about
the proper operation of your vehicle as well as
about possible vehicle damage. Damage to
your vehicle that arises from culpable contra-
ventions against these instructions is not cov-
ered either by the Mercedes-Benz Limited
Warranty or by the New or Used-Vehicle War-
ranty.

QR codes for the rescue card

The QR codes are secured in the fuel filler flap
and on the opposite side on the B-pillar. In the
event of an accident, rescue services can use
the QR code to quickly find the appropriate res-
cue card for your vehicle. The current rescue
card contains the most important information
about your vehicle in a compact form, e.g. the
routing of the electric cables.
You can find more information under
www.mercedes-benz.de/qr-code.
Data stored in the vehicle
Data storage
A wide range of electronic components in your
vehicle contain data memories.
These data memories temporarily or perma-
nently store technical information about:
the vehicle's operating state
R
incidents
R
malfunctions
R
In general, this technical information docu-
ments the state of a component, a module, a
system or the surroundings.
These include, for example:
operating conditions of system components,
R
e.g. fluid levels
the vehicle's status messages and those of its
R
individual components, e.g. number of wheel
revolutions/speed, deceleration in move-
ment, lateral acceleration, accelerator pedal
position
malfunctions and defects in important system
R
components, e.g. lights, brakes
vehicle reactions and operating conditions in
R
special driving situations, e.g. air bag deploy-
ment, intervention of stability control sys-
tems
ambient conditions, e.g. outside temperature
R
This data is of an exclusively technical nature
and can be used to:
assist in recognizing and rectifying malfunc-
R
tions and defects
analyze vehicle functions, e.g. after an acci-
R
dent
optimize vehicle functions
R
The data cannot be used to trace the vehicle's
movements.
When your vehicle is serviced, technical infor-
mation can be read from the event data memory
and malfunction data memory.
Services include, for example:
repair services
R
service processes
R
warranties
R
quality assurance
R
The vehicle is read out by employees of the ser-
vice network (including the manufacturer) using
special diagnostic testers. More detailed infor-
mation is obtained from it, if required.

Advertisement

Table of Contents
loading

Table of Contents