Mercedes-Benz C-Class Cabriolet 2018 Operator's Manual page 98

Seats
96
Adjusting the seats electrically
Head restraint height
:
Backrest angle
;
Seat height
=
Seat cushion length
?
Seat cushion angle
A
B Seat fore-and-aft adjustment
i
Further related subjects:
You can store the seat settings using the
R
memory function (
If PRE-SAFE
R
passenger seat will be moved to a better
position if it was previously in an unfavora-
ble position (
When the seat is moved forward or back,
R
the headrest is moved up or down auto-
matically.
Vehicles with AMG Performance seat: the height
of the head restraints cannot be adjusted.
Adjusting the head restraints
Important safety notes
G
WARNING
You could lose control of your vehicle if you do
the following while driving:
adjust the driver's seat, head restraint,
R
steering wheel or mirrors
fasten the seat belt
R
There is a risk of an accident.
Adjust the driver's seat, head restraint, steer-
ing wheel and mirror and fasten your seat belt
before starting the engine.
page 106).
Y
®
is triggered, the front-
page 58).
Y
G
WARNING
If the head restraints are not installed or not
adjusted correctly, they cannot provide pro-
tection as intended. There is an increased risk
of injury in the head and neck area, e.g. in the
event of an accident or when braking.
Always drive with the head restraints instal-
led. Before driving off, make sure for every
vehicle occupant that the center of the head
restraint supports the back of the head at
about eye level.
General notes
Pay attention to the important safety notes
( page 94).
Y
Do not rotate the head restraints of the front and
rear seats. Otherwise, you cannot adjust the
height and angle of the head restraints to the
correct position.
The rear seat head restraints are not height-
adjustable.
Adjusting the head restraint fore-and-
aft position manually
With this function you can adjust the distance
between the head restraint and the back of the
seat occupant's head.
To move forward: pull the head restraint
X
forward in the direction of the arrow until it
engages in the desired position.
To move back: press and hold the release
X
catch :.
Push the head restraint back.
X