Table of Contents
Advertisement
Loading the vehicle
322
Make sure that the SmartKey is in position 2
X
in the ignition lock (
Press ò on the steering wheel to call up
X
the menu list.
Press 9 or : on the steering wheel to
X
select the
Service
Confirm by pressing a on the steering
X
wheel.
Press 9 or : to select
X
sure.
Press a to confirm.
X
The multifunction display shows the current
tire pressure of each wheel or the
pressure will be displayed after
driving a few minutes
Press the : button.
X
The
Use Current Pressures as New Ref‐
erence Values
multifunction display.
If you wish to confirm the restart:
Press the a button.
X
The
Tire Press. Monitor Restarted
sage is shown on the multifunction display.
After driving for a few minutes, the system
checks whether the current tire pressures are
within the specified range. The new tire pres-
sures are then accepted as reference values
and monitored.
If you wish to cancel the restart:
Press the % button.
X
The tire pressure values stored at the last
restart will continue to be monitored.
Radio type approval for the tire pres-
sure monitor
Country
Radio type approval number
USA
FCC ID: MRXGG4
FCC ID: MRXMC34MA4
Canada
IC: 2546A-GG4
page 123).
Y
menu.
Tire Pres‐
Tire
message.
message is shown on the
Loading the vehicle
Instruction labels for tires and loads
G
WARNING
Overloaded tires can overheat, causing a
blowout. Overloaded tires can also impair the
steering and driving characteristics and lead
to brake failure. There is a risk of accident.
Observe the load rating of the tires. The load
rating must be at least half of the GAWR of
your vehicle. Never overload the tires by
exceeding the maximum load.
Two instruction labels on your vehicle show the
maximum possible load.
(1) The Tire and Loading Information placard is
on the B-pillar on the driver's side. The Tire
and Loading Information placard shows the
maximum permissible number of occu-
pants and the maximum permissible vehicle
load. It also contains details of the tire sizes
mes-
and corresponding pressures for tires
mounted at the factory.
(2) The vehicle identification plate is on the B-
pillar on the driver's side. The vehicle iden-
tification plate informs you of the gross
vehicle weight rating. It is made up of the
vehicle weight, all vehicle occupants, the
fuel and the cargo. You can also find infor-
mation about the maximum gross axle
weight rating on the front and rear axle.
The maximum gross axle weight rating is
the maximum weight that can be carried by
one axle (front or rear axle). Never exceed
the maximum load or the maximum gross
axle weight rating for the front or rear axle.
:
B-pillar, driver's side
Advertisement
Table of Contents
