Advertisement
IMPORTANT!
■ Check the lint filter is clean before every load. Ensure it is replaced correctly before
using your dryer.
■ The lint filter indicator light will flash at the beginning of every cycle when the machine
is switched on, as a reminder to check the lint filter.
■ Sort and load items into the dryer drum, ensuring no items are in the way of the door.
■ Close the door.
■ Ensure your dryer connect to an appropriate power supply(220V-240V, 50Hz).
Preparing your load
■ Check whether the loads have been spun by washing machine.
■ Check pockets for items that could damage your clothes or get caught in the dryer.
■ Close zippers, hooks, fastenings (ie fasten the openings of duvet/doona covers), and
remove loose bra wires. These may damage both your dryer and your clothes.
■ Make sure that the laundry is suitable for drying in the tumble dryer. You can find
some information on the laundry labels.
Loading the dryer
Garments need to be loaded correctly to minimise creasing and wrinkling, and to
ensure the load is dried evenly. Make sure there is plenty of room for the garments
to tumble freely while drying.
To reduce tangling and creasing
■ Load items individually.
■ Ensure duvet/doona covers are fastened before placing in the dryer.
■ Shake clothes out and load individually to help items dry evenly.
■ Launder permanent press garments separately, eg business shirts.
■ Allow enough room in the dryer for clothes to tumble freely.
■ Hang garments as soon as the drying cycle is complete to reduce the need for
ironing.
IMPORTANT!
■ Do not overload your dryer, as this may damage your dryer and clothes.
■ Never put dripping wet clothes in or on top of the dryer as excess water may
cause an electrical hazard.
■ Do not place an item in your dryer unless the care label specifically states it is
safe to do so.
■ Always follow the instructions on the care label.
■ Do not dry curtains in your dryer. Sunlight makes them brittle and they may
disintegrate during drying.
USING YOUR DRYER
14
Advertisement
