Table of Contents
Advertisement
5. OPTIONS
Activate or deactivate the op-
tions before the start of a pro-
gram. You cannot activate or de-
activate the options while a pro-
gram operates.
If one or more options are set,
make sure that the related indi-
cators are on before the program
starts.
5.1 ExtraHygiene
With this option you have better hygiene
results. During the rinsing phase, the
temperature stays at 70 °C for at least 10
minutes.
How to activate the ExtraHygiene
option
1. Press ExtraHygiene. The related in-
dicator comes on. In the display you
can see the update of the program
duration.
• If the option is not applicable to
the program, the related indicator
flashes quickly 3 times and then
goes off.
5.2 Multitab
Activate this option only when you use
the combi detergent tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The program duration can increase.
How to activate the Multitab option
1. Press Multitab, the related indicator
comes on.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Set the water softener to the highest
level.
2. Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest program with a
rinsing phase, without detergent and
without dishes.
4. Adjust the water softener to the wa-
ter hardness in your area.
5. Adjust the released quantity of rinse
aid.
5.3 Acoustic signals
The acoustic signals operate when the
appliance has a malfunction, when the
adjustment of the level of the water soft-
ener occurs and when the program is
completed.
By default, the acoustic signals are on,
but it is possible to deactivate them.
How to deactivate the acoustic signals
1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer to
"Setting and starting a program".
2. Press and hold, at the same time,
and
until the indicators of
and
start to flash.
3. Press
.
•
The indicators of
off.
• The indicator of
flash.
• The display shows the current set-
ting.
4. Press
to change the setting.
5. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
ENGLISH
9
,
and
go
continues to
Acoustic signals
on.
Acoustic signals
off.
Advertisement
Table of Contents
