Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FAVORIT 78601 VI1P
Summary of Contents for AEG FAVORIT 78601 VI1P
- Page 1 User Manual FAVORIT 78601 VI1P Dishwasher...
-
Page 2: Table Of Contents
15. WARRANTY ........................ 21 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. -
Page 3: Safety Information
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. -
Page 4: Safety Instructions
Put knives and cutlery with sharp points in the cutlery • basket with the points down or in a horizontal position. Do not keep the appliance door open without • supervision to prevent to fall on it. Before maintenance, deactivate the appliance and •... - Page 5 ENGLISH 2.3 Water connection 2.4 Use • Make sure not to cause damage to • Do not sit or stand on the open door. the water hoses. • Dishwasher detergents are • Before you connect the appliance to dangerous. Obey the safety new pipes or pipes not used for a instructions on the detergent long time, let the water flow until it is...
-
Page 6: Product Description
3. PRODUCT DESCRIPTION Top spray arm Rinse aid dispenser Upper spray arm Detergent dispenser Lower spray arm Cutlery basket Filters Lower basket Rating plate Upper basket Air vent 3.1 Beam-on-Floor • When the appliance has a malfunction, the red light flashes. -
Page 7: Control Panel
ENGLISH 4. CONTROL PANEL On/off button TimeSaver button Display XtraDry button Delay button RESET button Program button Indicators ExtraHygiene button 5. PROGRAMMES Programme Degree of soil Programme phases Options Type of load • Normal soil • Prewash • ExtraHygiene • Crockery and •... - Page 8 Programme Degree of soil Programme phases Options Type of load • Normal soil • Prewash • XtraDry • Crockery and • Wash 50 °C cutlery • Rinses • Dry 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil.
-
Page 9: Settings
ENGLISH 6. SETTINGS 6.1 Programme selection the indicators start to mode and user mode flash and the display is blank. 2. Press When the appliance is in programme selection mode it is possible to set a • The indicators go off. programme and to enter the user mode. -
Page 10: Options
• The display shows the current 1. To enter the user mode, press and setting: = the rinse aid hold simultaneously until dispenser is activated (factory the indicators start to setting). flash and the display is blank. 3. Press to change the setting. -
Page 11: Before First Use
ENGLISH 7.3 ExtraHygiene washing and the drying phases are shorter. With this option you have better hygiene The total programme duration decreases results. During the last rinsing phase, the by approximately 50%. temperature stays at 70 °C for at least 10 minutes. -
Page 12: Daily Use
9. DAILY USE 1. Open the water tap. automatically the appliance when it is not 2. Press the on/off button to activate operating. the appliance. The function comes into operation: Make sure that the appliance is in • 5 minutes after the completion of the programme selection mode. -
Page 13: Hints And Tips
ENGLISH Make sure that there is detergent in the If the door is opened for detergent dispenser before you start a more than 30 seconds new programme. during the drying phase, the running programme will end. End of programme Cancelling the delay start while When the programme is completed and you open the door, the appliance is the countdown operates... -
Page 14: Care And Cleaning
• Make sure that cutlery and dishes do • The programme is applicable for the not bond together. Mix spoons with type of load and for the degree of other cutlery. soil. • Make sure that glasses do not touch •... - Page 15 ENGLISH 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). CAUTION! An incorrect position of the filters can cause bad washing results and damage 4.
-
Page 16: Troubleshooting
11.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. 11.4 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. - Page 17 ENGLISH Problem and alarm code Possible solution You cannot activate the ap- • Make sure that the mains plug is connected to the pliance. mains socket. • Make sure that there is no damaged fuse in the fuse box. The programme does not •...
- Page 18 Refer to "Before first use", Authorised Service Centre. "Daily use", or "Hints and For alarm codes not described in the tips" for other possible table, contact an Authorised Service causes. Centre. Once you have checked the appliance, deactivate and activate the appliance.
-
Page 19: Technical Information
ENGLISH Problem Possible cause and solution Traces of rust on cutlery. • There is too much salt in the water used for washing. Refer to "The water softener". • Silver and stainless steel cutlery were placed together. Avoid to put silver and stainless steel items close to- gether. -
Page 20: Installation
Power consumption Off-mode (W) 0.10 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption. - Page 21 ENGLISH • If water pressure is in excess of 800 and must have a continuous fall to the kPa, a pressure reducing valve should plumbing connection. be used. Check for leaks. The drain hose can be lengthened using • If water temperature is in excess of additional lengths and connectors.
- Page 22 ENVIRONMENT CONCERNS marked with the symbol with the Recycle the materials with the symbol household waste. Return the product to Put the packaging in applicable your local recycling facility or contact containers to recycle it. Help protect the your municipal office.
-
Page 23: Warranty
(d) ‘ASC’ means AEG authorised service centres; (viii) failure to comply with any additional instructions supplied with (e) AEG is the brand controlled by Electrolux Home Products Pty Ltd the Appliance; of 163 O’Riordan Street, Mascot NSW 2020, ABN 51 004 762 341... - Page 24 www.aeg.com/au...