MOTOR ASSEMBLY
1. Disassemble the BACK COVER.
2. Remove the bolt.
3. Pull out the ROTOR.
ROTOR
4. Unscrew the 2 screws from the tub bracket.
5. Remove the 6 bolts on the stator.
STATOR
6. Unplug the 2 connectors from the STATOR.
DAMPER
1. Disassemble the CABINET COVER or BACK COVER.
2. Disassemble the damper hinges from the tub
and base.
3. Separate the dampers.
※ ※ NOTE
• Do not re-use an old damper pin. Always
replace it with a new one.
38