DISPENSER ASSEMBLY
DISPENSER ASSEMBLY
INLET VALVE ASSEMBLY
Clamp
32
1. Disassemble the CONTROL PANEL ASSEMBLY
(refer to page 29).
2. Disassemble the TOP PLATE ASSEMBLY
(refer to page 30).
3. Disassemble the clamps and hoses.
4. Disassemble the bellows at the lower side of DISPENSER
1. Disassemble the CONTROL PANEL ASSEMBLY
(refer to page 29).
2. Disassemble the TOP PLATE ASSEMBLY
(refer to page 30).
3. Disassemble the 4 connectors from the VALVES.
4. Disassemble the clamps and hoses.
5. Unscrew the 2 screws in the back.
Connector Color
① ① Blue Housing (OR-BK)
② ② White Housing (WH-BK)
③ ③ Blue Housing (GY-BK)
④ ④ Red Housing (BL-BK)