LG CW2079CWD Service Manual page 11

■ INSTALL THE APPLIANCE
ON A FLAT AND FIRM SURFACE
solid floor
■ Level floor
• Allowable slope under entire washer is 1°.
• To minimize noise and vibration, the washer
MUST be installed on a solidly constructed
floor.
• Carpeting and soft tile surfaces are not
recommended.
• Never install the washer on a platform or
weakly supported structure.
■ CONNECT POWER PLUG
· Connect the power plug to the wall outlet.
•
Must be within 60 (1.5 m) of either side of the
washer. Do not overload the outlet with more
than one appliance.
•
Time-delay fuse or circuit breaker is recommended.
NOTE: A firm, solid floor is even more critical to a
front-loading washer than to a top-loader.
If your floor is wood and/or frame
construction, you may need to reinforce it.
Front-loaders use substantially faster spin
speeds than top-loaders, causing greater
vibration. If the floor is not solid, your washer
will vibrate. You will hear and feel the
vibration throughout your house.
· Avoid connecting several electric devices, as
doing so may cause a fire.
NOTE: It is the personal responsibility and obligation
of the customer to have a proper outlet
installed by a qualified electrician.
10