Table of Contents
Advertisement
MAIN PWB ASSEMBLY
CONNECTOR
PROTECT COVER
1. Disassemble the CONTROL PANEL ASSEMBLY
(refer to page 29).
2. Disassemble the TOP PLATE ASSEMBLY
(refer to page 30).
3. Unscrew a screw on PRESSURE SWITCH
ASSEMBLY
4. Remove all wire from hooks.
5. Remove the Protective Cover.
6. Disconnect the connectors.
7. Unscrew 1 screw on the back.
8. Disassemble the MAIN PWB ASSEMBLY.
31
Advertisement
Table of Contents
Troubleshooting
