Electrolux EIS64383 User Manual page 14

14 www.electrolux.com
3. Slide your finger to the left or right to
select the desired time (e.g. hours
and minutes).
4. Touch OK to confirm your selection.
You can also choose
selection.
When the time comes to an end, a signal
sounds and
the signal.
To deactivate the function touch
the left of the timer value, touch
to it and confirm your choice when a pop-
up window appears.
Stopwatch
The function automatically starts
counting immediately after you activate a
cooking zone. You can use this function
to monitor how long it operates.
1. Touch
2. Scroll the Menu to select Settings >
Stopwatch.
3. Touch the switch to turn the function
on / off.
The function does not stop when you lift
the pot. To reset the function and start it
again manually touch
from the pop-up window. The function
starts counting from 0. To Pause the
function for one cooking session touch
and select Pause from the pop-up
window. Select Start to continue
counting.
7.10 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates only
symbols can be used. All other
symbols on the control panel are locked.
The function does not stop the timer
functions.
Touch to activate the function.
comes on. The heat setting is lowered
to 1.
To deactivate the function touch
to cancel your
blinks. Touch to stop
to access the Menu.
, select Reset
The function stops PowerBoost. The
highest heat setting reactivates when
you touch
7.11 Lock
You can lock the control panel while the
hob operates. It prevents an accidental
change of the heat setting.
Set the heat setting first.
to
Touch
next
To deactivate the function, touch
seconds.
When you deactivate the
hob, you also deactivate this
function.
7.12 Child Lock
This function prevents an accidental
operation of the hob.
1. Touch
Menu.
2. Select Settings > Child Lock from the
list.
3. Turn the switch on and touch the
letters A-O-X in the alphabetical
order to activate the function. To
deactivate the function turn the
switch off.
To leave the Menu, touch
side of the display, outside of the pop-up
window. To navigate through the Menu,
use or .
7.13 Language
1. Touch
Menu.
2. Select Settings > Setup > Language
and
from the list.
3. Choose the appropriate language
from the list.
If you chose the wrong language, touch
. A list appears. Select the third option
from the top, then the last but one option.
Next, select the second option. Scroll
down to choose the appropriate
language from the list. Finally, choose
the option on the right.
.
again.
to activate the function.
on the display to open the
or the right
on the display to open the
for 3