Electrolux EIS64383 User Manual page 13

Power Management with Power
limitation function
When you set the Power limitation
function, the power of the hob is divided
between all cooking zones.
7.8 Bridge function
This function connects two cooking
zones and they operate as one with the
same heat setting.
You can use the function with large
cookware.
1. Place the cookware on two cooking
zones. The cookware must cover the
centres of both zones.
2. Touch to activate the function.
The zone symbol changes.
3. Set the heat setting.
The cookware must cover the centres of
both zones but not go beyond the area
marking.
To deactivate the function, touch
cooking zones operate independently.
7.9 Timer
Count Down Timer
+STOP
Use this function to specify how long a
cooking zone should operate during a
single cooking session.
You can set the function for each
cooking zone separately.
1. Set the heat setting for the
appropriate cooking zone first and
then set the function.
2. Touch the zone symbol.
3. Touch .
The timer menu window appears on the
display.
4. Check to activate the function.
The symbols change to
5. Slide your finger to the left or right to
select the desired time (e.g. hours
and/or minutes).
6. Touch OK to confirm your selection.
You can also choose
selection.
When the time comes to an end, a signal
sounds and blinks. Touch
the signal.
To deactivate the function set the heat
setting to 0. Alternatively, touch
the left of the timer value, touch
to it and confirm your choice when a pop-
up window appears.
Minute Minder
You can use this function when the hob
is activated but the cooking zones do not
operate.
The function has no effect on the
operation of the cooking zones.
1. Select any cooking zone.
The relevant slider appears on the
display.
2. Touch .
The timer menu window appears on the
display.
ENGLISH 13
. The
.
+STOP
to cancel your
to stop
to
next