Electrolux EIS64383 User Manual page 12

12 www.electrolux.com
detects it and the relevant slider appears
on the display. The slider is visible for 8
seconds, after that time the display goes
back to the main view. To close the slider
faster tap the screen outside of the slider
area.
When other zones are active the heat
setting for the zone you want to use may
be limited. Refer to "Power
Management".
Make sure that the pot is
suitable for induction hobs.
For more information on
cookware types refer to
"Hints and tips". Check the
size of the pot in "Technical
data".
7.4 Heat setting
1. Activate the hob.
2. Place the pot on the selected cooking
zone.
The slider for the active cooking zone
appears on the display and is active for 8
seconds.
3. Touch or slide your finger to set the
desired heat setting.
The symbol turns red and becomes
bigger.
You can also change the heat setting
while cooking. Touch the zone selection
symbol on the main view of the control
panel and move you finger to the left or
right (to lower or increase the heat
setting).
7.5 PowerBoost
This function activates more power for
the appropriate induction cooking zone; it
depends on the cookware size. The
function can be activated only for a
limited period of time.
1. Touch the desired zone symbol first.
2. Touch
right to activate the function for the
chosen cooking zone.
or slide your finger to the
The symbol turns red and becomes
bigger.
The function deactivates automatically.
To deactivate the function manually
select the zone and change its heat
setting.
For maximum duration
values, refer to "Technical
data".
7.6 Power limitation
Originally the appliance works at the
highest possible power level. You can
change the maximum power if the
installation does not support the full
power.
Make sure that the selected
power fits to the house
installation fuses.
1. Touch on the display to open the
Menu.
2. Select Settings > Setup > Power
Management and choose the
appropriate power level.
To leave the Menu touch the right side of
the display, outside of the pop-up
window, or touch repeatedly.
7.7 Power Management
• All cooking zones are connected to
one phase. See the illustration.
• The function activates when the total
electricity loading of the cooking
zones exceeds the maximum
electricity loading of the phase.
• The function activates as well when
the electricity loading of a pair of
zones (left or right) exceeds 3600 W.
• The function divides the power
between cooking zones.
• The function limits the power of the
other cooking zones, which has an
influence on the available heat
setting.
• The maximum heat setting is visible
on the slider. Only the digits in white
are active.
• If a higher heat setting is not
available, reduce it for the other
cooking zones first.