Disconnecting The Nfc-Compatible Device By One-Touch (Nfc); Switching Devices By One-Touch (Nfc); Pairing And Connecting With A Computer (Windows 10) - Sony SRS-XB10 Operating Instructions Manual

Disconnecting the NFC-compatible device by One-touch
(NFC)
You can disconnect the speaker from the connected NFC-compatible device such as a
smartphone or Walkman, etc. by touching the speaker with it.
1. Touch the device on the N marked part of the speaker.
Hint

After the speaker is disconnected from the device by One-touch, if no operation is performed
and no sound is input for 15 minutes, the speaker turns off automatically by the auto power off
function.

If you cannot disconnect the speaker, try the following.
o Move the device slowly over the N marked part of the speaker.
o
If the device is in a case, remove the case.

Switching devices by One-touch (NFC)


If you move an NFC-compatible device over the N marked part of the speaker while the speaker
has been connected with the other BLUETOOTH device, the speaker disconnects from the
BLUETOOTH device, then connects with the NFC-compatible device that was just touched.
However, if you are talking on a BLUETOOTH mobile phone connected to the speaker, you
cannot switch the BLUETOOTH connection by One-touch.

When you touch an NFC-compatible device that has been connected with the speaker via the
BLUETOOTH connection on another NFC-compatible BLUETOOTH headset or BLUETOOTH
speaker, the NFC-compatible device disconnects from the speaker and connects with the
BLUETOOTH device it just touched.

If you cannot switch devices, try the following.
o Move the NFC-compatible device slowly over the N marked part of the speaker.
o If the NFC-compatible device is in a case, remove the case.

Pairing and connecting with a computer (Windows 10)