Sony SRS-XB10 Operating Instructions Manual page 21

5. Check that the
When the speaker is connected to the computer, the
lit. You can enjoy playing back music from your computer.
Hint

The procedure explained above is for guidance only. For details, refer to the operating
instructions supplied with the computer.

You can perform pairing or connect to another BLUETOOTH device even when a BLUETOOTH
connection is established. In this case, the previous connection will be disconnected.

If your computer does not have the BLUETOOTH function, it will be necessary to connect a
commercially available BLUETOOTH adaptor to the computer.
Note

The pairing mode of the speaker is released after about 1 minute and the
indicator flashes slowly. However, when pairing information is not stored in the speaker, such as
at the factory settings, the pairing mode is not released. If the pairing mode is released before
finishing the process, repeat from step

Once BLUETOOTH devices are paired, there is no need to pair them again, except in the
following cases:
o Pairing information has been deleted after repair, etc.
o The speaker is already paired with 8 devices and another device is to be paired.
The speaker can be paired with up to 8 devices. If a new device is paired after 8 devices
have already been paired, the paired device with the oldest connection time is replaced
by the new one.
(BLUETOOTH) indicator has switched from flashing to a steady light.
(BLUETOOTH) indicator stays
.
(BLUETOOTH)