McCulloch M125-85FH Operator's Manual page 11

10. Attach the tension spring to apply tension to the
drive belt.
11. Attach the drive belt cover.
12. Set the cutting height lever in a position between 1–
5.
To remove the cutting deck
1. Park the product on level ground.
2. Apply the parking brake.
3. Set the cutting height lever in the servicing position
(S).
4. Lower the cutting deck to operation position.
623 - 001 - 06.03.2018
5. Release the clip and remove the drive belt cover.
6. To loosen the drive belt tension, extend the spring
for the drive belt (A) and lift it up (B).
7. Remove the drive belt.
8. Hold the front edge of the cutting deck with 2 hands
and pull it out.
B
A
11