McCulloch M125-85FH Operator's Manual page 10

To attach the seat
1. Attach the seat with the 4 washers and screws.
2. Adjust the seat to the correct position. Refer to
adjust the seat on page 12 .
To attach the cutting deck
1. Park the product on level ground.
2. Apply the parking brake.
3. Put the drive belt below the cutting deck stay.
4. Set the cutting height lever in the servicing position
(S).
5. Align the pipes on the cutting deck with the pipes on
the equipment frame.
10
6. Hold the cutting deck with 2 hands and push it in.
To
7. Push the cutting deck in and make sure that the
guide bolts are put into the grooves on the
equipment frame.
8. Push until the pipes and the bolts touch the bottom.
9. Attach the drive belt as given in the illustration.
623 - 001 - 06.03.2018