Radio Control; Manual Tuning - Pyle PLTV7R Owner's Manual

Press the OPEN/CLOSE button to turn the power on and to open the monitor. The monitor
shows following picture. (Radio mode)

MANUAL TUNING

Press the CH UP/DOWN button to move downward or upward one step respectively until
the desired station frequency is selected.
MANUAL STORING OF STATION
1. Tune in the desired radio station you wish to store on the CH number.
2. Press the M(MEMORY) button to store the desired radio station.
The station will be stored into the next CH number of the last CH number previously
stored station.
3. They can be stored up to 30 radio stations in each band.
FM1:30, FM2: 30, AM1:30, AM2:30 stations (total 120 stations).
AUTO MEMORY OF STATION
1. Tune in desired radio station you wish to store on the CH number.
2. Press the AS/ATM button for at least 2 seconds. The frequency on the display
continues to change while the auto memory is in progress.
The tuner will automatically seek and can store up to 30 stations in each band in order of
frequency signal.They can be stored in FM1: 30, FM2: 30, AM1: 30 and AM2: 30
stations (total 120 stations).
3. When the auto memory has been completed, the tuner goes to the station stored in the
CH No.1.
12

RADIO CONTROL