HoMedics TOTALCOMFORT UV-C Instruction Manual And Warranty Information page 11

4. Clean the transducer/ultrasonic
membrane and float with a 50/50 mix of
white vinegar and water on a cotton
swab. Wipe off with a damp cotton swab.
NEVER touch the transducer/ultrasonic
membrane with your fingers; the natural
oils in the skin can damage the surface.
NEVER submerge the top in water or any
other liquid.
5. After cleaning,
reassemble the
humidifier, fill with
water, plug in, and
turn on.
TO CLEAN THE TANK
Remove the top cover from the humidifier.
Every day: Empty and rinse the inside of the tank before refilling.
Every week: To remove any scale or buildup, use a 50/50 mixture of white vinegar
and lukewarm water to clean the inside of the tank.
TO CLEAN THE OIL TRAY
Open the oil tray and remove the pad. Essential oil pads should be changed
when switching to a different scent. If continuing to use the same scent, set the
oil pad aside for reuse. Wipe the inside of the oil tray with a soft cloth. Place the
essential oil pad back in the tray and close.
NOTE: Leave the essential oil pad out of the oil tray when storing.
TO CLEAN THE SURFACE
Clean the surface of the unit with a soft, damp cloth.
STORAGE
Clean the surface of the unit with a soft, damp cloth. Clean the water tank, float and
the transducer/ultrasonic membrane following the cleaning instructions for each part.
Be sure to let all parts dry completely before storing. Clean the oil tray with a soft,
damp cloth. After storing, rinse the tank with water prior to operating.
6. Press and hold the
11
1 4
2 8
3 12
timer and night-light
buttons for 3 seconds,
until the LED light
above the clean icon
turns off.