Pairing And Connecting With An Android Smartphone - Sony WF-C700N Help Manual

Help Guide
Wireless Noise Canceling Stereo Headset
WF-C700N

Pairing and connecting with an Android smartphone

The operation to register the device that you wish to connect to is called "pairing". First, pair a device to use it with the
headset for the first time.
Before starting the operation, make sure of the following:
The Android smartphone is placed within 1 m (3.2 ft) of the headset.
The headset is charged sufficiently.
The operating instructions for the Android smartphone is in hand.
Enter pairing mode on this headset.
1
When you pair the headset with a device for the first time after purchase or after initializing the
headset (when there is no pairing information on the headset)
1.
Remove both headset units from the charging case.
The headset turns on automatically.
The headset enters pairing mode automatically.
You will hear a notification sound and the voice guidance say "Pairing" from both headset units at the same
time.
When you pair a second or subsequent device (the headset has pairing information for other
devices)
1.
Set the headset units into the charging case.
Leave the charging case lid open.
2.
With the charging case lid open, press and hold the pairing button on the back of the charging case for about 5
seconds or more.
Note
35