Table of Contents
Advertisement
EVA Expandable Vertical Array
To attach the tie plates:
4
Figure 7.2: Grid assembly detail
A
B
C
D
E
To assemble the grid:
1.
2.
The majority of EVA applications come with full-range arrays of three or four modules.
It is possible to suspend up to eight EVA-2082S and/or EVA-1151D (discontinued) modules
together, with up to a combined maximum loudspeaker column weight of 720 lb (327 kg).
When using EVA-2151D subwoofers, the combined maximum loudspeaker column weight is
840 lb (381 kg), or five EVA-2082S modules under two EVA-2151D modules. Subwoofers are
installed at the top of the array.
7.2
Deciding which grid configuration to use with an array
7.2.1
Standard grid with or without second spreader bar
The EVA-SG2 standard grid is appropriate for the majority of applications covered by a three-
to four-module full-range array.
EVA-SG2 parts included
Quantity
1
2
2
2
The spreader bar and the two side arms assemble into a grid using the two shoulder bolts and
nylon washers.
Electro-Voice
Use the supplied M10 bolts.
Spreader bar
Grid side arm
Nylon washer
M10 shoulder bolt
EVA module
Attach the spreader bar with the supplied M10 shoulder bolts and nylon washers.
Attach the grid side arms with the M10 bolts supplied.
Component
Spreader bar
Side arm
Shoulder bolt
Nylon washer
A
B
Installation manual
Rigging system | en
C
D
E
2023-01 | 04 | F01U196199
23
Advertisement
Table of Contents
