Remote Control - Moen ET900 Installation Manual

REMOTE CONTROL

THE BLUE LIGHT OF WATER
TEMPERATURE IS FLICKERING.
REMOTE CONTROL IS NOT WORKING.
TOILET UNIT
THE PRODUCT DOES NOT FLUSH.
SOFT-CLOSING FEATURE
FOOT TOUCH SENSOR DOES NOT WORK.
FAULT DIAGNOSES
LOW BATTERY.
CHECK WHETHER OR NOT THERE IS WATER
ON THE REMOTE CONTROL.
FAULT DIAGNOSES
NO POWER SUPPLY.
WATER BOWL IS EMPTY AND NO SOUND OF FLUSHING.
FLUSH VALVE IS HEARD, BUT WATER IS NOT FLOWING.
CONTINUOUS FLOW OF WATER SUPPLY.
FAULT DIAGNOSES
SOFT-CLOSED FEATURE DAMAGED.
SOLUTIONS
PLEASE REPLACE WITH NEW BATTERIES.
WIPE OFF WATER WITH A DRY TOWEL.
ALLOW REMOTE TO DRY BEFORE USE.
SOLUTIONS
ENSURE TOILET IS PLUGGED IN AND
OUTLET IS FUNCTIONING PROPERLY.
ENSURE WATER SUPPLY IS FULLY ON.
CONTACT MOEN FOR ASSISTANCE.
1. CHECK THE WATER SUPPLY LINES FOR A KINK.
2. ENSURE SUPPLY VALVE IS FULLY OPEN.
3. IF PROBLEM PERSISTS;
CONTACT MOEN FOR ASSISTANCE
1. TRY FACTORY RESET OF TOILET BY UNPLUGGING
POWER CORD, WAITING 1 MINUTE AND PLUGGING
BACK IN. FOLLOW START UP PROCEDURE.
2. IF PROBLEM PERSISTS;
COTACT MOEN FOR ASSISTANCE.
SOLUTIONS
1. TRY FACTORY RESET OF TOILET BY UNPLUGGING
POWER CORD, WAITING 1 MINUTE AND PLUGGING
BACK IN. FOLLOW START UP PROCEDURE.
2. IF PROBLEM PERSISTS;
COTACT MOEN FOR ASSISTANCE.
INS12982- 06/23