Cleaning And Storage - Kenmore K PA3D0AMW Series Use & Care Manual

8. Reinstall the back cover panel. Insert bottom tabs into the two
bottom slots in unit body. Push top of panel forward to secure into
place.
REPLACEMENT FILTERS
Kenmore Air Purifier
Model Number
K*PA3D0AMW
(* = A to Z)
To purchase replacement filters call 1-833-946-4239

CLEANING AND STORAGE

Cleaning Exterior Surfaces
WARNING: To avoid serious injury from electrical shock, ALWAYS turn
the Air Purifier OFF and unplug it BEFORE cleaning.
1. Turn the Air Purifier OFF and unplug from power outlet.
2. Clean exterior surfaces with a damp soft cloth only. DO NOT pour or splash
water on the unit. Do not use any abrasive-type cleaner. Wipe all surfaces
free from dust and grime, especially the grill intake and exhaust openings.
Remove rear cover to improve access to cleaning intake openings. See rear
cover removal instructions in FILTER REPLACEMENT section.
3. Once all surfaces are completely dry, plug unit back into power outlet for
operation.
Cleaning the Dust Sensor
WARNING: To avoid serious injury from electrical shock, ALWAYS turn
the Air Purifier OFF and unplug it BEFORE cleaning.
The Dust Sensor must be cleaned regularly once every 6 months.
In case of severe soiling, clean the sensor more often as necessary.
Filter Pack Description
Activated Carbon Filter (4),
HEPA Filter (1)
Washable Pre-Filter (1)
1. Remove the appliance back panel. Remove
the small sensor cover.
7
Item Number
K*PFE-A
K*PFP-A