LOCKING SWITCH IN
THE "OFF" POSITION
IMPORTANT: We suggest that when the machine is not
in use, the switch be locked in the "OFF" position using
a padlock (C) Fig. 14, through the two holes in the start
button (A) as shown.
RAISING AND LOWERING THE TABLE
Adjustment to the table height can be made by loosening lock knob (A) Fig. 15, and
rotating table raising and lowering handwheel (B). To raise the table, turn handwheel
(B) clockwise; to lower the table, turn handwheel (B) counterclockwise. Tighten lock
knob (A) Fig. 15, after table height adjustment is made. The English/Metric table height
scale (C) Fig. 15, indicates the table height setting. IMPORTANT: For best results, setting
of the table should always be made from the bottom to the up position.
A
C
Fig. 15
9
A
C
Fig. 14
B