LG WD14030D6 Service Manual page 31

1
Disassemble the Hall Sensor
1) Disassemble the hook of Hall Sensor by (-) driver.
2) Pull up Hall Sensor slowly as shown in picture.
Caution
If you disassemble by force,not following the directions,
the hooks of stator(red circled) might break.
Hence need change of stator assembly.
So disassemble cautiously.
2 Assemble the Hall Sensor
1) Adjust the hole of Hall Sensor to
the hooks of stator as shown in red circle
[Note]
Hall Sensor Part No.
• 24" / 25" : 6501KW2001A • 27" : 6501KW2002A
31
2) Push down the Hall sensor,
and assemble to the hook securely.