Problem Solving Guide; Technical Problems - Miele PFD 100 SmartBiz Operating Instructions Manual

Problem solving guide

With the aid of the following guide, most minor problems that can occur during
daily operation can be corrected without contacting Miele. You can save time and
money in many cases, as you do not need to call the Miele Customer Service
Department.
The following guide should help you to find the reason for a malfunction or fault
and to correct it. You should, however, note the following:

Danger due to incorrect repairs.
Incorrect repairs can cause considerable danger to users.
Repairs must only be carried out by the Miele Customer Service Department, an
authorised Miele dealer or a suitably qualified specialist.

Technical problems

Problem
The display remains
dark after the dish-
washer has been
switched on with the
 sensor control.
The dishwasher stops
during a programme.
70
Cause and remedy
The dishwasher is not plugged in.
 Insert the plug and switch on at the socket.
The mains fuse has tripped.
 Reset the trip switch in the fuse box or replace the
fuse in the plug (see data plate for minimum fuse
rating).
 If the mains fuse trips again, contact the Miele
Customer Service Department.
The mains fuse has tripped.
 Reset the trip switch in the fuse box or replace the
fuse in the plug (see data plate for minimum fuse
rating).
 If the mains fuse trips again, contact Miele
Service.